Mjolnir V2.5- Natural Cherry

The Hammer of Thor is BACK!

The all new V2.5 hammer of Thor carries the new magnetic switch design and the VapeSafe2, auto reset fuse.

The Legendary Mjolnir includes all the same features as our Flat Top 18350 Single Battery Pipes.

All Mjolnirs come standard with a flat aluminum switch (no substitutions please). If you wish to have a domed switch you can purchase a spare here->

Domed V2 Button

ATTN: This flat V2 button does NOT have the same "on", "off" capibility as the domed button. Flipping it upside down will make it constantly fire.

Acceptable Batteries-

IMR 18350 (flat top) The recommended battery for our pipes. Typical usage will require a battery change once or twice a day (6-8 hours vape time.)

 *Do not use batteries that have the label peeled off (cover battery with electrical tape if no label)

Acceptable Atomizers-

-          Any atomizer with a 510/eGo thread

-          Other thread types can be used with an adapter.

Our V2/2.5 switch or button is mechanical and easy replaceable and interchangeable.

Currently the only V2/2.5 Switch materail available is Aluminum. Other metals/ materials may be available in the future.

The Vape Safe will not work and is not required for our pipes as it already has the built in Vape Safe 2.




Care and Maintenance

Our products are made of real wood. For this reason, try not to spill any pipe sauce/ e-
juice on your mod. E-juice can warp and crack the wood of the mod. Should you get e-
juice on your mod, quickly wipe it off with a dry paper towel. A drip shield can help
prevent leaking attys/cartos.

When attaching atomizers/cartomizers, be careful not to over-tighten them. There may be
a visible gap between your atty/carto and the connector when attached properly. Over-
tightening can easily cause a hard short between your atomizer and the center pin in your
mod tripping the built in VapeSafe 2 protection circuit. If you trip the fuse, your steam
pipe will cease to operate until the short is corrected. The most common and simplest
solution is to try a different atty/carto. The VapeSafe 2 protection circuit will not require
any action on your part. Once the atty/carto has been swapped the pipe should begin
to operate normally again. WARNING!!! The VapeSafe 2 protection circuit can fail
permanently making the pipe unusable if a hard short occurs and the switch remains in
the on position for over 6 seconds. If your pipe isn’t firing stop pressing the switch and
try using a different atty.


Your pipe has been polished using the same methods traditional pipe makers have
used for hundreds of years. The finish is an all-natural Carnauba Wax. It will dull to a
satin sheen over time. We carry 2 different wax pipe conditioners on the website for you
to help maintain the shine and lovely appearance of the wood.
Occasionally you may need to clean the metal ring and positive post at the bottom
of the bowl. A Q-tip works nicely, and a small amount of alcohol may be used but is not
necessary. If there appears to be a film or fog on the metal contacts or the button, a quick
cleaning will improve the performance.

Please visit ePipeMods YouTube channel for a library of helpful videos.